Capacity : 1,000GB (1GB=1 Billion byte by IDEMA) * Actual usable capacity may be less (due to formatting, partitioning, operating system, applications or otherwise)
\n
Form Factor : M.2 (2280)
\n
Interface : PCIe Gen 4.0 x4, NVMe 1.3c
\n
Dimension (WxHxD) : 80.15 x 22.15 x 2.38 (mm)
\n
Weight : Max 9.0 g Weight
\n
Storage Memory : Samsung V-NAND 3-bit MLC
\n
Controller : Samsung Elpis Controller
\n
Cache Memory : Samsung 1GB Low Power DDR4 SDRAM
\n
\n
Special Feature
\n
\n
TRIM Support : Supported
\n
S.M.A.R.T Support : Supported
\n
GC (Garbage Collection) : Auto Garbage Collection Algorithm
Sequential Read : Up to 7,000 MB/s * Performance may vary based on system hardware & configuration
\n
Sequential Write : Up to 5,000 MB/s * Performance may vary based on system hardware & configuration
\n
Random Read (4 KB, QD32) : Up to 1,000,000 IOPS * Performance may vary based on system hardware & configuration
\n
Random Write (4KB, QD32) : Up to 1,000,000 IOPS * Performance may vary based on system hardware & configuration
\n
Random Read (4 KB, QD1) : Up to 22,000 IOPS * Performance may vary based on system hardware & configuration
\n
Random Write (4 KB, QD1) : Up to 60,000 IOPS * Performance may vary based on system hardware & configuration
\n
\n
Environment
\n
\n
Average Power Consumption (system level) : *Average: 6.2 W *Maximum: 8.9 W (Burst mode) * Actual power consumption may vary depending on system hardware & configuration
\n
Power consumption (Idle) : Max. 35 mW * Actual power consumption may vary depending on system hardware & configuration
\n
Allowable Voltage : 3.3 V ± 5 % Allowable voltage
\n
Reliability (MTBF) : 1.5 Million Hours Reliability (MTBF)
\n
Operating Temperature : 0 - 70 ℃ Operating Temperature
\n
Shock : 1,500 G & 0.5 ms (Half sine)
\n
\n
Accessories
\n
\n
Installation Kit : Not Available
\n
\n
Software
\n
\n
Management SW : Magician Software for SSD management
\n
\n
\n
","description_ar":"
\n
\n
General Feature
\n
\n
Application : Client PCsClient PCs
\n
Capacity : 1,000GB (1GB=1 Billion byte by IDEMA) * Actual usable capacity may be less (due to formatting, partitioning, operating system, applications or otherwise)
\n
Form Factor : M.2 (2280)
\n
Interface : PCIe Gen 4.0 x4, NVMe 1.3c
\n
Dimension (WxHxD) : 80.15 x 22.15 x 2.38 (mm)
\n
Weight : Max 9.0 g Weight
\n
Storage Memory : Samsung V-NAND 3-bit MLC
\n
Controller : Samsung Elpis Controller
\n
Cache Memory : Samsung 1GB Low Power DDR4 SDRAM
\n
\n
Special Feature
\n
\n
TRIM Support : Supported
\n
S.M.A.R.T Support : Supported
\n
GC (Garbage Collection) : Auto Garbage Collection Algorithm
Sequential Read : Up to 7,000 MB/s * Performance may vary based on system hardware & configuration
\n
Sequential Write : Up to 5,000 MB/s * Performance may vary based on system hardware & configuration
\n
Random Read (4 KB, QD32) : Up to 1,000,000 IOPS * Performance may vary based on system hardware & configuration
\n
Random Write (4KB, QD32) : Up to 1,000,000 IOPS * Performance may vary based on system hardware & configuration
\n
Random Read (4 KB, QD1) : Up to 22,000 IOPS * Performance may vary based on system hardware & configuration
\n
Random Write (4 KB, QD1) : Up to 60,000 IOPS * Performance may vary based on system hardware & configuration
\n
\n
Environment
\n
\n
Average Power Consumption (system level) : *Average: 6.2 W *Maximum: 8.9 W (Burst mode) * Actual power consumption may vary depending on system hardware & configuration
\n
Power consumption (Idle) : Max. 35 mW * Actual power consumption may vary depending on system hardware & configuration
\n
Allowable Voltage : 3.3 V ± 5 % Allowable voltage
\n
Reliability (MTBF) : 1.5 Million Hours Reliability (MTBF)
\n
Operating Temperature : 0 - 70 ℃ Operating Temperature
\n
Shock : 1,500 G & 0.5 ms (Half sine)
\n
\n
Accessories
\n
\n
Installation Kit : Not Available
\n
\n
Software
\n
\n
Management SW : Magician Software for SSD management
Ergonomic Design: The gaming chair is designed based on ergonomic principles, featuring a stylish design and optimized functions for more comfort. It supports four points: neck, shoulders, waist, and buttocks, giving you the feeling of sitting in a luxury car seat. The high-back design fits the line from your head to your neck. The lumbar support fits the S-curve of your waist, making it easy to maintain an ideal posture and reduce strain. The seat height can be adjusted by 2.8 inches (7 cm), making it easy to match the height of your gaming desk or study desk.
\n
Prevents Fatigue Even After Long Hours: The body of the gaming chair is made of high-density molded urethane that is neither too soft nor too hard, providing excellent durability, shape retention, and a superior seating experience.The bionic curve of the backrest and lumbar support primarily supports the waist, correcting posture and reducing fatigue and strain on the waist caused by misalignment, making it a less tiring gaming chair even after long hours of sitting.The entire chair is made of PU leather, which is stain-resistant and easy to clean by simply wiping off spills of water or other substances.
\n
Fully Equipped Gaming Chair: The seat height is adjustable by 2.8 inches (7 cm), with a recline function up to 165° and a rocking function like a rocker.The armrests are adjustable in height by 2.8 inches (7 cm) and in angle by ±15° to relieve arm stress.The resilient, shock-absorbing resin silent casters are highly wear-resistant and will not scratch the floor.The footrest, headrest, and lumbar support help maintain correct posture and provide a comfortable gaming experience.The explosion-proof seat bracket, made of approximately 0.1 inch (2 mm) thick steel, withstands high pressure and offers excellent safety and stability.
\n
Relax in Your Preferred Position: The backrest can recline smoothly between 90–165°, allowing you to relax in your preferred sitting or lying position.The retractable footrest can be pulled out for a comfortable leg position during naps and stored under the seat when not in use, saving space and adding convenience.The gaming chair is convenient for changing posture or taking breaks during play.It is also ideal as a study chair for students, a work or home office chair for professionals.
\n
Safe: Load capacity (max): Approx. 363.8 lbs (165 kg); Recommended weight: 66.1 – 176.4 lbs (30 – 80 kg); Recommended height: 4 ft 7 inches – 6 ft 1 inches (140 – 185 cm).Includes special tools and a Japanese instruction manual for assembly (English language not guaranteed).Assembly and disassembly videos available.
\n
","description_ar":"
\n
Ergonomic Design: The gaming chair is designed based on ergonomic principles, featuring a stylish design and optimized functions for more comfort. It supports four points: neck, shoulders, waist, and buttocks, giving you the feeling of sitting in a luxury car seat. The high-back design fits the line from your head to your neck. The lumbar support fits the S-curve of your waist, making it easy to maintain an ideal posture and reduce strain. The seat height can be adjusted by 2.8 inches (7 cm), making it easy to match the height of your gaming desk or study desk.
\n
Prevents Fatigue Even After Long Hours: The body of the gaming chair is made of high-density molded urethane that is neither too soft nor too hard, providing excellent durability, shape retention, and a superior seating experience.The bionic curve of the backrest and lumbar support primarily supports the waist, correcting posture and reducing fatigue and strain on the waist caused by misalignment, making it a less tiring gaming chair even after long hours of sitting.The entire chair is made of PU leather, which is stain-resistant and easy to clean by simply wiping off spills of water or other substances.
\n
Fully Equipped Gaming Chair: The seat height is adjustable by 2.8 inches (7 cm), with a recline function up to 165° and a rocking function like a rocker.The armrests are adjustable in height by 2.8 inches (7 cm) and in angle by ±15° to relieve arm stress.The resilient, shock-absorbing resin silent casters are highly wear-resistant and will not scratch the floor.The footrest, headrest, and lumbar support help maintain correct posture and provide a comfortable gaming experience.The explosion-proof seat bracket, made of approximately 0.1 inch (2 mm) thick steel, withstands high pressure and offers excellent safety and stability.
\n
Relax in Your Preferred Position: The backrest can recline smoothly between 90–165°, allowing you to relax in your preferred sitting or lying position.The retractable footrest can be pulled out for a comfortable leg position during naps and stored under the seat when not in use, saving space and adding convenience.The gaming chair is convenient for changing posture or taking breaks during play.It is also ideal as a study chair for students, a work or home office chair for professionals.
\n
Safe: Load capacity (max): Approx. 363.8 lbs (165 kg); Recommended weight: 66.1 – 176.4 lbs (30 – 80 kg); Recommended height: 4 ft 7 inches – 6 ft 1 inches (140 – 185 cm).Includes special tools and a Japanese instruction manual for assembly (English language not guaranteed).Assembly and disassembly videos available.
\n
\n
","available":true,"image":"https://api.anas-iq.com/media/products/cc9d69bd-6bea-4035-b926-66579004fbf4.jpg","image_2":"https://api.anas-iq.com/media/products/63e9afc6-7424-4419-b299-77a5b35cc610.jpg","image_3":"https://api.anas-iq.com/media/products/1511027c-bff0-43b1-a0f3-affc72d331b4.jpg","color":"","tag":"","category":69,"category_name":"Chairs and Desks","category_name_ar":"كراسي وطاولات","sub_category":285,"sub_category_name":"Gaming Chair","sub_category_name_ar":"كرسي ألعاب","company":240,"company_name":"GXTrace","company_name_ar":"GXTrace","created_by":3,"updated_by":3,"created":"2024-10-23T14:23:54.803542Z","modified":"2026-06-25T13:20:04.863402Z"}]}